GENERATOR(for 80A Type) INSTALLATION

PROCEDURE


  1. INSTALL GENERATOR ASSEMBLY


    1. A005K4HE02

      Install the generator with the 2 bolts.

      Torque:
      Bolt A
      54 N*m  { 551 kgf*cm, 40 ft.*lbf }
      Bolt B
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

    2. Install the 2 wire harness brackets with the 3 bolts.

      Torque:
      8.4 N*m  { 85 kgf*cm, 73 in.*lbf }

    3. Connect the 2 connectors and 4 clamps.

    4. Install the wire harness to terminal B with the nut.

      Torque:
      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

    5. Install the terminal cap.

  2. INSTALL ENGINE OIL LEVEL DIPSTICK GUIDE

    Click here

  3. INSTALL OIL LEVEL DIPSTICK SUB-ASSEMBLY

    Click here

  4. INSTALL FAN AND GENERATOR V BELT

    Click here

  5. INSTALL INLET NO. 1 AIR CLEANER

    Click here

  6. INSPECT FOR ENGINE OIL LEAK

  7. REMOVE ENGINE UNDER COVER RH

    Click here

  8. INSTALL NO. 1 ENGINE COVER

    Click here

  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Torque:
    5.4 N*m  { 55 kgf*cm, 48 in.*lbf }