GENERATOR(for 80A Type) REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE NO. 1 ENGINE COVER

    Click here

  4. REMOVE INLET NO. 1 AIR CLEANER

    Click here

  5. REMOVE ENGINE UNDER COVER RH

    Click here

  6. REMOVE FAN AND GENERATOR V BELT

    Click here

  7. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

    Click here

  8. REMOVE OIL LEVEL DIPSTICK SUB-ASSEMBLY

    Click here

  9. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE

    Click here

  10. REMOVE GENERATOR ASSEMBLY

    A005LVXE01

    1. Remove the terminal cap.

    2. Remove the nut and disconnect the wire harness from terminal B.

      Text in Illustration
      *1 Terminal B

    3. Disconnect the 2 connectors and 2 clamps.

    4. A005HLV

      Remove the 3 bolts and 2 wire harness brackets.

    5. Disengage the 2 wire harness clamps.

    6. A005J8P

      Remove the 2 bolts and the generator assembly.