POWER MANAGEMENT CONTROL ECU INSTALLATION

PROCEDURE

1. INSTALL POWER MANAGEMENT CONTROL ECU

   
   

   1. Install the power management control ECU with the nut.

      Torque:

      8.4 N*m  { 86 kgf*cm, 74 in.*lbf }

   2. Connect the 2 connectors.

2. INSTALL INSTRUMENT PANEL UNDER TRAY (for LHD)

   Click here

3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

   Click here

4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD with Rear Fog Light)

   Click here

5. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (for RHD)

   Click here