| DTC Code | DTC Name |
|---|---|
| HOW TO PROCEED WITH TROUBLESHOOTING |
CAUTION / NOTICE / HINT
Tech Tips
Use the following procedure to troubleshoot the rear view monitor system.
*: Use the Intelligent tester.
PROCEDURE
VEHICLE BROUGHT TO WORKSHOP
| Result | ||
|---|---|---|
|
| NEXT |
|
CUSTOMER PROBLEM ANALYSIS
| Result | ||
|---|---|---|
|
| NEXT |
|
INSPECT BATTERY VOLTAGE
| Standard Voltage |
|---|
| 11 to 14 V |
If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.
| Result | ||
|---|---|---|
|
| NEXT |
|
INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*
Use the Intelligent tester to check if the CAN communication system is functioning normally.
| Result | ||||||
|---|---|---|---|---|---|---|
|
| B |
|
GO TO CAN COMMUNICATION SYSTEM Click here |
| A |
|
PROBLEM SYMPTOM CONFIRMATION
| Result | ||||||
|---|---|---|---|---|---|---|
|
| B |
|
GO TO STEP 8 Click here |
| A |
|
SYMPTOM SIMULATION
| Result | ||
|---|---|---|
|
| NEXT |
|
CHECK IF SAME SYMPTOM APPEARS IN AUDIO AND VISUAL SYSTEM
Refer to Audio and Visual System (for radio and display type).
| Result | ||||||
|---|---|---|---|---|---|---|
|
| B |
|
GO TO AUDIO AND VISUAL SYSTEM Click here |
| A |
|
PROBLEM SYMPTOMS TABLE
Refer to Problem Symptoms Table.
| Result | ||||||
|---|---|---|---|---|---|---|
|
| B |
|
GO TO STEP 11 Click here |
| A |
|
BASED ON MALFUNCTION SYMPTOM, PERFORM TROUBLESHOOTING BELOW
Refer to Terminals of ECU.
| Result | ||
|---|---|---|
|
| NEXT |
|
ADJUST, REPAIR OR REPLACE
| Result | ||
|---|---|---|
|
| NEXT |
|
CONFIRMATION TEST
| Result | ||
|---|---|---|
|
| NEXT |
|
END |