RADIO ANTENNA CORD REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY

    Click here

  4. REMOVE ANTENNA CORD SUB-ASSEMBLY


    1. Disconnect the connector.

    2. Remove the bolt.

    3. Disengage the 7 clamps and remove the antenna cord sub-assembly.

      A005L97

  5. REMOVE ROOF HEADLINING ASSEMBLY

    Click here

  6. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY (except Glass Roof)


    1. Peel off the 12 strips of adhesive tape.

    2. Remove the No. 2 antenna cord sub-assembly from the roof headlining assembly.

      A005H4T

  7. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY (for Glass Roof)


    1. Peel off the 15 strips of adhesive tape.

    2. Remove the No. 2 antenna cord sub-assembly from the roof headlining assembly.

      A005K0V