REAR DOOR SPEAKER INSPECTION

PROCEDURE


  1. INSPECT REAR SPEAKER ASSEMBLY

    Note

    Do not touch the cone part of the speaker.


    1. Check the speaker installation.

      OK
      The speaker is securely installed.

      If the result is not as specified, replace the rear speaker assembly.

    2. Check the speaker visual.

      OK
      The cone paper of the speaker is not torn.

      If the result is not as specified, replace the rear speaker assembly.

    3. A005MCWE02
      Text in Illustration
      *a

      Component without harness connected

      (Rear Speaker Assembly)

      Check the speaker resistance.


      1. Disconnect the rear speaker assembly connector.

      2. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 Always 4 Ω

        If the result is not as specified, replace the rear speaker assembly.