REAR DOOR SPEAKER INSTALLATION

PROCEDURE

1. INSTALL REAR SPEAKER ASSEMBLY

   

   Note

   Do not touch the cone part of the speaker.

   
   

   1. Temporarily install the rear speaker assembly by engaging the 2 claws of the rear speaker assembly to the rear door panel sub-assembly.

   2. Using an air riveter or a hand riveter, install the rear speaker assembly with a 3 new rivets.

      Note

      
      

      • 

        Do not pry on the rivets with the riveter, as this will cause damage to the riveter and mandrel.

        Text in Illustration

        *1	Mandrel
        *2	Riveter
        *a	INCORRECT
        *b	CORRECT

      • 

        Confirm that the rivets are seated properly against the speaker.

        Text in Illustration

        *1	Riveter
        *a	INCORRECT
        *b	CORRECT

      • Do not tilt the riveter when installing the rivets to the speaker.

      • Do not leave any clearance between the rivet heads and speaker.

      • 

        Do not leave any clearance between the speaker and door. Firmly hold the 2 items together while installing the rivets.

        Text in Illustration

        *1	Riveter
        *a	INCORRECT
        *b	CORRECT

   3. Connect the rear speaker assembly connector.

2. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY

   Click here

3. INSTALL REAR DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Rear Power Window)

   Click here

4. INSTALL REAR DOOR ARMREST UPPER BASE PANEL

   Click here