FRONT DOOR SPEAKER INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY

   

   Note

   Do not touch the cone part of the front No. 1 speaker assembly.

   
   

   1. Temporarily install the front No. 1 speaker assembly by engaging the 2 claws of the front No. 1 speaker assembly to the front door panel sub-assembly.

   2. Using an air riveter or a hand riveter, install the front No. 1 speaker assembly with 3 new rivets.

      Note

      
      

      • 

        Do not pry on the rivets with the riveter, as this will cause damage to the riveter and mandrel.

        Text in Illustration

        *1	Mandrel
        *2	Riveter
        *a	INCORRECT
        *b	CORRECT

      • 

        Confirm that the rivets are seated properly against the speaker.

        Text in Illustration

        *1	Riveter
        *a	INCORRECT
        *b	CORRECT

      • Do not tilt the riveter when installing the rivets to the speaker.

      • Do not leave any clearance between the rivet heads and speaker.

      • 

        Do not leave any clearance between the speaker and door. Firmly hold the 2 items together while installing the rivets.

        Text in Illustration

        *1	Riveter
        *a	INCORRECT
        *b	CORRECT

   3. Connect the front No. 1 speaker assembly connector.

2. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for 6 Speakers)

   
   

   1. Engage the 3 claws and install the front No. 2 speaker assembly.

3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY

   Click here

4. INSTALL FRONT ARMREST UPPER BASE PANEL (for Driver Side)

   Click here

5. INSTALL FRONT ARMREST UPPER BASE PANEL (for Front Passenger Side)

   Tech Tips

   Use the same procedure for the driver side.