PARKING BRAKE SWITCH(for Lever Type Parking Brake) INSPECTION

PROCEDURE


  1. INSPECT PARKING BRAKE SWITCH ASSEMBLY


    1. A005K5PE08
      Text in Illustration
      *a

      Component without harness connected

      (Parking Brake Switch Assembly)

      Measure the resistance between the connector terminal and the nut inside the parking brake switch assembly.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 - Switch body

      Parking brake switch ON

      (Switch pin free)

      		 Below 1 Ω

      Parking brake switch OFF

      (Switch pin pushed in)

      		 10 kΩ or higher

      If the value is not as specified, replace the parking brake switch assembly.