PARKING BRAKE SWITCH(for Pedal Type Parking Brake) INSTALLATION

PROCEDURE

1. INSTALL PARKING BRAKE SWITCH ASSEMBLY

   
   

   1. Install the parking brake switch with the screw.

      Torque:

      3.2 N*m  { 33 kgf*cm, 28 in.*lbf }

2. INSTALL PARKING BRAKE PEDAL SUB-ASSEMBLY

   
   

   1. Install the parking brake pedal sub-assembly with the 3 bolts.

      Torque:

      9.0 N*m  { 92 kgf*cm, 80 in.*lbf }

   2. Connect the parking brake switch connector.

3. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIR BAG ASSEMBLY (w/ Knee Airbag)

   Click here

4. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (w/o Knee Airbag)

   Click here

5. INSTALL INSTRUMENT PANEL UNDER TRAY (w/o Knee Airbag)

   Click here

6. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/o Knee Airbag)

   Click here

7. INSTALL REAR CONSOLE BOX

   Click here