REAR BRAKE FLEXIBLE HOSE(for Disc Type) REMOVAL

PROCEDURE


  1. REMOVE REAR WHEEL

  2. DRAIN BRAKE FLUID

    Note

    Immediately wash off any brake fluid that comes into contact with any painted surfaces.

  3. REMOVE REAR FLEXIBLE HOSE


    1. A005LU8

      Using a union nut wrench, disconnect the 2 brake tubes while holding the rear flexible hose with a wrench.

      Note


      • Do not kink or damage the brake line.

      • Do not allow any foreign matter such as dirt and dust to enter the brake line.

    2. Remove the 2 clips and rear flexible hose.

  4. REMOVE REAR BRAKE TUBE FLEXIBLE HOSE


    1. A005KAN

      Using a union nut wrench, separate the brake tube while holding the flexible hose with a wrench.

      Note


      • Do not kink or damage the brake line.

      • Do not allow any foreign matter such as dirt and dust to enter the brake line.

    2. Remove the clip and separate the flexible hose.

    3. Remove the union bolt, gasket and flexible hose.