REAR BRAKE(for Drum Type) DISASSEMBLY

PROCEDURE


  1. REMOVE REAR BRAKE SHOE KIT


    1. A005IMUE01

      Using SST, separate the shoe return spring from the front brake shoe.

      SST
      09921-00010

      Note

      Do not damage the wheel cylinder boot.

    2. A005JIXE01

      Using SST, remove the shoe hold down spring cup, shoe hold down spring, pin and front brake shoe.

      SST
      09718-00011
    3. A005LLS

      Remove the tension spring.

    4. A005KEJ

      Remove the shoe return spring from the rear brake shoe and remove the parking brake shoe strut set.

    5. A005M2UE01

      Using SST, remove the shoe hold down spring cup, shoe hold down spring, pin and rear brake shoe.

      SST
      09718-00011
    6. A005HOY

      Using needle-nose pliers, separate the parking brake cable.

  2. REMOVE REAR BRAKE AUTOMATIC ADJUST LEVER


    1. A005LFZ

      Remove the automatic adjust lever tension spring and remove the automatic adjust lever.

  3. REMOVE REAR BRAKE PARKING BRAKE SHOE LEVER SUB-ASSEMBLY


    1. A005IW0

      Using a screwdriver, remove the C-washer and parking brake shoe lever.

  4. REMOVE REAR DRUM BRAKE BLEEDER PLUG CAP

  5. REMOVE REAR DRUM BRAKE BLEEDER PLUG

  6. REMOVE REAR WHEEL BRAKE CYLINDER ASSEMBLY


    1. A005GXQ

      Using a union nut wrench, separate the brake tube from the rear wheel brake cylinder.

      Tech Tips

      Use a container to catch the brake fluid.

    2. Remove the 2 bolts and rear wheel brake cylinder.

  7. REMOVE REAR WHEEL CYLINDER KIT


    1. A005JR0E01
      Text in Illustration
      *1 Wheel Cylinder Boot
      *2 Wheel Cylinder Piston
      *3 Wheel Cylinder Cup
      *4 Compression Spring

      Remove the 2 wheel cylinder boots from the wheel brake cylinder.

    2. Remove the 2 pistons.

    3. Remove the wheel cylinder cup from each piston.

    4. Remove the compression spring.