REAR BRAKE(for Drum Type) REMOVAL

PROCEDURE


  1. REMOVE REAR CONSOLE BOX

    Click here

  2. REMOVE REAR WHEEL

  3. DRAIN BRAKE FLUID

    Note

    Immediately wash off any brake fluid that comes into contact with any painted surfaces.

  4. LOOSEN LOCK NUT (for Lever Type Parking Brake)

    Click here

  5. LOOSEN NO. 1 WIRE ADJUSTING NUT (for Pedal Type Parking Brake)

    Click here

  6. REMOVE REAR BRAKE DRUM SUB-ASSEMBLY


    1. Release the parking brake and remove the rear brake drum.

      If the rear brake drum cannot be removed easily, perform the following procedure.

    2. A005MB3E01
      Text in Illustration
      *1 Automatic Adjust Lever
      A005GO2 Contract

      Remove the hole plug and insert a screwdriver through the hole into the backing plate, and hold the automatic adjust lever away from the adjuster.

    3. Using another screwdriver, contract the brake shoe by turning the adjusting bolt.