REAR BRAKE(for Disc Type) DISASSEMBLY

PROCEDURE


  1. REMOVE REAR DISC BRAKE PISTON


    1. A005J4DE01

      Using SST, remove the piston by turning it counterclockwise.

      SST
      09719-12010   ( 09719-01030 )

      Note


      • Do not damage the piston.

      • Do not spatter the brake fluid.

  2. REMOVE CYLINDER BOOT


    1. Remove the cylinder boot from the piston.

  3. REMOVE PISTON SEAL


    1. A005GLNE04
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver with its tip wrapped in protective tape, remove the piston seal from the rear disc brake cylinder.

      Note

      Do not damage the inner surface or piston seal groove of the cylinder.

      Tech Tips

      Tape the screwdriver tip before use.

  4. REMOVE REAR DISC BRAKE BLEEDER PLUG CAP

  5. REMOVE REAR DISC BRAKE BLEEDER PLUG