BRAKE BOOSTER(for RHD) REASSEMBLY

PROCEDURE


  1. INSTALL CHECK VALVE GROMMET (for 1NR-FE)


    1. Install the a new check valve grommet to the brake booster assembly.

  2. INSTALL CHECK VALVE GROMMET (for 1NZ-FE)


    1. Install 2 new check valve grommets to the brake booster assembly.

  3. INSTALL VACUUM SENSOR ASSEMBLY (for 1NZ-FE)


    1. A005GOBE04
      Text in Illustration
      *a Upper Side of Vehicle
      *b 40° +/- 20°

      Install the vacuum sensor assembly to the brake booster assembly as shown in the illustration.

  4. INSTALL BRAKE VACUUM CHECK VALVE ASSEMBLY


    1. A005L67E01
      Text in Illustration
      *a Upper Side of Vehicle
      *b 30° +/- 20°

      Install the brake vacuum check valve assembly to the brake booster assembly as shown in the illustration.

  5. TEMPORARILY TIGHTEN BRAKE MASTER CYLINDER PUSH ROD CLEVIS


    1. Install the push rod lock nut and brake master cylinder push rod clevis to the brake booster assembly.

      Tech Tips

      Tighten the push rod lock nut after adjusting the brake pedal height.