POWER STEERING SYSTEM, Diagnostic DTC:C1516

DTC Code DTC Name
C1516 Torque Sensor Zero Point Adjustment Incomplete

DESCRIPTION

This DTC does not indicate a malfunction. The power steering ECU assembly outputs this DTC when it determines that the torque sensor zero point calibration has not been completed successfully.

DTC No. DTC Detection Condition Trouble Area
C1516 Torque sensor zero point calibration not completed successfully.

  • Torque sensor zero point calibration failure

  • Steering column assembly

CAUTION / NOTICE / HINT

Note

If the power steering ECU assembly or steering column assembly has been replaced, perform the torque sensor zero point calibration Click here.

PROCEDURE


  1. CLEAR DTC


    1. Clear the DTCs Click here.


    NEXT

  2. PERFORM ZERO POINT CALIBRATION (TORQUE SENSOR)


    1. Perform torque sensor zero point calibration Click here.


    NEXT

  3. CONFIRM DTC


    1. Check for DTCs Click here.

      Result
      Result Proceed to
      DTC is still output even after performing torque sensor zero point calibration 3 times*1. A
      DTC is still output even after performing torque sensor zero point calibration once or twice*2. B
      Normal system code is output. C

      Tech Tips


      • *1: The power steering ECU assembly must be replaced if DTC C1516 is still output even after the torque sensor zero point calibration is performed 3 times.

      • *2: Perform the torque sensor zero point calibration again if DTC C1516 is still output even after the calibration is performed once or twice.


    B

    PERFORM ZERO POINT CALIBRATION AGAIN (TORQUE SENSOR) Click here

    C

    END

    A

  4. REPLACE POWER STEERING ECU ASSEMBLY


    1. Replace the power steering ECU assembly.

      Tech Tips



    NEXT

  5. PERFORM ZERO POINT CALIBRATION (TORQUE SENSOR)


    1. Perform the torque sensor zero point calibration Click here.


    NEXT

  6. CONFIRM DTC


    1. Check for DTCs Click here.

      Result
      Result Proceed to

      DTC is still output even after performing torque sensor zero point calibration 3 times*1.

      (for LHD)

      		 A

      DTC is still output even after performing torque sensor zero point calibration 3 times*1.

      (for RHD)

      		 B
      DTC is still output even after performing torque sensor zero point calibration once or twice*2. C
      Normal system code is output. D

      Tech Tips


      • *1: The power steering ECU assembly must be replaced if DTC C1516 is still output even after the torque sensor zero point calibration is performed 3 times.

      • *2: Perform the torque sensor zero point calibration again if DTC C1516 is still output even after the calibration is performed once or twice.


    A

    REPLACE STEERING COLUMN ASSEMBLY Click here

    B

    REPLACE STEERING COLUMN ASSEMBLY Click here

    C

    PERFORM ZERO POINT CALIBRATION AGAIN (TORQUE SENSOR) Click here

    D

    END