BRAKE MASTER CYLINDER(for RHD) DISASSEMBLY

PROCEDURE

1. REMOVE BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY

   
   

   1. 

      Fix the brake master cylinder in a vise between aluminum plates.

      Note

      Do not overtighten the vise.

   2. Using a pin punch and a hammer, tap out the straight pin and remove the brake master cylinder reservoir.

2. REMOVE MASTER CYLINDER RESERVOIR GROMMET

   
   

   1. Remove the 2 grommets from the master cylinder reservoir.

3. REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY

4. REMOVE BRAKE MASTER CYLINDER RESERVOIR STRAINER