BRAKE MASTER CYLINDER(for LHD) REASSEMBLY

PROCEDURE


  1. INSTALL BRAKE MASTER CYLINDER RESERVOIR STRAINER

  2. INSTALL BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY

  3. INSTALL BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY


    1. Apply lithium soap base glycol grease to 2 new grommets.

    2. Install the 2 grommets onto the brake master cylinder reservoir.

    3. Install the brake master cylinder reservoir to the master cylinder body.

    4. A005IUY

      Fix the brake master cylinder in a vise between aluminum plates.

      Note

      Do not overtighten the vise.

    5. Using a pin punch and a hammer, tap in the straight pin.