DECELERATION SENSOR INSTALLATION

PROCEDURE

1. INSTALL DECELERATION SENSOR

   
   

   1. Connect the deceleration sensor connector.

   2. Install the deceleration sensor with the 2 bolts.

      Torque:

      14 N*m  { 143 kgf*cm, 10 ft.*lbf }

2. INSTALL REAR CONSOLE BOX

   Click here

3. DECELERATION SENSOR ZERO POINT CALIBRATION, AND CVT OIL PRESSURE CALIBRATION

   for K411 Click here

   for K310 Click here

4. TEST MODE INSPECTION

   Click here