TIRE AND WHEEL SYSTEM INSPECTION

PROCEDURE


  1. INSPECT TIRES


    1. Check the tires for wear and proper inflation pressure.

      Cold Tire Inflation Pressure
      Tire Size

      Front

      kPa (kgf/cm2, psi)

      Rear

      kPa (kgf/cm2, psi)
      175/60R16 82H 230 (2.3, 33) 230 (2.3, 33)
      185/60R15 84H
      185/65R15 88H
      185/60R16 86H
    2. A005HOG

      Using a dial indicator, check the tire runout.

      Tire runout
      1.4 mm (0.0551 in.) or less (Vertical)
      2.0 mm (0.0787 in.) or less (Lateral)

  2. ROTATE TIRES

    A005KH9

    Tech Tips

    Rotate the tires, as shown in the illustration.

    Text in Illustration
    A005GO2 Front

  3. INSPECT WHEEL BALANCE


    1. Check and perform off-car balancing.

    2. If required, perform on-car balancing.

      Imbalance after adjustment
      8.0 g (0.0176 lb) or less

  4. INSPECT FRONT AXLE HUB BEARING

    Click here

  5. INSPECT REAR AXLE HUB BEARING

    Click here