FRONT STABILIZER BAR INSTALLATION

PROCEDURE


  1. INSTALL FRONT STABILIZER BAR BUSH


    1. A005HRGE01
      Text in Illustration
      *1 Bush Stopper
      A005GO2 Front Side
      A005IBX Outer Side

      Install the front stabilizer bar bush onto the front stabilizer bar.

      Tech Tips


      • Install the bush onto the stabilizer so that the bush stopper of the stabilizer bar faces the outside of the vehicle.

      • Install the bush with its cutout facing the front of the vehicle.

  2. INSTALL FRONT STABILIZER BAR


    1. A005KW5E01
      Text in Illustration
      *a Paint Mark
      A005GO2 Left Side

      Install the stabilizer onto the crossmember with the paint mark on the left side of the vehicle.

  3. INSTALL FRONT STABILIZER BRACKET LH


    1. A005J0RE01

      Provisionally tighten bolt A.

    2. Tighten the bolts to the specified torque, in the order of B then A.

      Torque:
      47 N*m  { 479 kgf*cm, 35 ft.*lbf }

  4. INSTALL FRONT STABILIZER BRACKET RH

    Tech Tips

    Use the same procedure for the RH side as for the LH side.

  5. INSTALL POWER STEERING GEAR

    Click here

  6. INSTALL FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY

    Click here

  7. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT

    Click here