FRONT LOWER SUSPENSION ARM INSTALLATION

PROCEDURE

1. TEMPORARILY TIGHTEN FRONT LOWER SUSPENSION ARM SUB-ASSEMBLY

   
   

   1. Temporarily install the front lower suspension arm sub-assembly with the bolt.

2. INSTALL FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY

   Click here

3. INSTALL FRONT WHEEL

   Torque:

   103 N*m  { 1050 kgf*cm, 76 ft.*lbf }

4. STABILIZE SUSPENSION

   
   

   1. Bounce the vehicle up and down several times to stabilize the suspension.

5. FULLY TIGHTEN FRONT LOWER SUSPENSION ARM SUB-ASSEMBLY

   
   

   1. Fully tighten the bolt.

      Torque:

      137 N*m  { 1397 kgf*cm, 101 ft.*lbf }

6. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT

   Click here