REAR WHEEL ALIGNMENT INSPECTION

PROCEDURE


  1. INSPECT TIRES

    Click here

  2. MEASURE VEHICLE HEIGHT

    Click here

  3. INSPECT CAMBER


    1. Install the camber-caster-kingpin gauge and position the rear wheel on the alignment tester.

    2. Inspect the camber.

      Camber
      Engine Tire Size Camber Right - left error

      1NR-FE

      1ND-TV

      185/65R 15

      185/60R 16

      		 -0°56' +/- 30' 0°30'
      1NR-FE 185/60R 15 -0°53' +/- 30'
      1NZ-FE 175/60R 16 -0°57' +/- 30'

      Note

      The tolerance for the difference between the left and right wheels is 30' (0.5°) or less for both cambers. If the camber is not within the specified range, inspect the suspension parts and replace them if necessary.

  4. INSPECT TOE-IN

    A005HASE12
    Text in Illustration
    A005GO2 Front
    Toe-in
    Engine Tire Size B - A

    1NR-FE

    1ND-TV

    		 185/65R 15

    3.2 +/- 3.0 mm

    (0.126 +/- 0.118 in.)
    185/60R 16

    3.3 +/- 3.0 mm

    (0.130 +/- 0.118 in.)
    1NR-FE 185/60R 15

    2.5 +/- 3.0 mm

    (0.098 +/- 0.118 in.)
    1NZ-FE 175/60R 16

    3.6 +/- 3.0 mm

    (0.142 +/- 0.118 in.)

    If the toe-in is not within the specified range, inspect the suspension parts and replace them if necessary.