REAR AXLE HUB INSTALLATION

PROCEDURE


  1. INSTALL REAR AXLE HUB AND BEARING ASSEMBLY (for Rear Drum Brake)


    1. Install the axle hub and bearing onto the axle beam with the 4 bolts.

      Torque:
      90 N*m  { 918 kgf*cm, 66 ft.*lbf }

  2. INSTALL REAR AXLE HUB AND BEARING ASSEMBLY (for Rear Disc Brake)


    1. Install the dust cover and the axle hub and bearing onto the axle beam with the 4 bolts.

      Torque:
      90 N*m  { 918 kgf*cm, 66 ft.*lbf }

  3. INSPECT REAR AXLE HUB BEARING BACKLASH (for Rear Drum Brake)

    Click here

  4. INSPECT REAR AXLE HUB BEARING BACKLASH (for Rear Disc Brake)

    Click here

  5. INSPECT REAR AXLE HUB RUNOUT (for Rear Drum Brake)

    Click here

  6. INSPECT REAR AXLE HUB RUNOUT (for Rear Disc Brake)

    Click here

  7. CONNECT SKID CONTROL SENSOR WIRE


    1. A005IEG

      Connect the skid control sensor wire connector.

  8. INSTALL REAR DISC (for Rear Disc Brake)

    Click here

  9. INSTALL REAR DISC BRAKE CYLINDER MOUNTING LH (for Rear Disc Brake)

    Click here

  10. INSTALL REAR DISC BRAKE PAD KIT (for Rear Disc Brake)

    Click here

  11. INSTALL REAR DISC BRAKE CYLINDER ASSEMBLY LH (for Rear Disc Brake)

    Click here

  12. INSTALL NO. 3 PARKING BRAKE CABLE ASSEMBLY (for Rear Disc Brake)

    Click here

  13. INSTALL REAR BRAKE DRUM SUB-ASSEMBLY (for Rear Drum Brake)

  14. ADJUST REAR DRUM BRAKE SHOE CLEARANCE (for Rear Drum Brake)

    Click here

  15. INSTALL REAR WHEEL

    Torque:
    103 N*m  { 1050 kgf*cm, 76 ft.*lbf }

  16. INSPECT AND ADJUST PARKING BRAKE LEVER TRAVEL

    Click here

  17. INSPECT REAR WHEEL ALIGNMENT

    Click here

  18. CHECK ABS SENSOR SIGNAL (w/o VSC)

    Click here

  19. CHECK ABS SENSOR SIGNAL (w/ VSC)

    Click here