REAR AXLE HUB REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE REAR WHEEL

  2. REMOVE REAR BRAKE DRUM SUB-ASSEMBLY (for Rear Drum Brake)

    Click here

  3. SEPARATE NO. 3 PARKING BRAKE CABLE ASSEMBLY (for Rear Disc Brake)

    Click here

  4. SEPARATE REAR DISC BRAKE CYLINDER ASSEMBLY LH (for Rear Disc Brake)

    Click here

  5. REMOVE REAR DISC BRAKE PAD KIT (for Rear Disc Brake)

    Click here

  6. REMOVE REAR DISC BRAKE CYLINDER MOUNTING LH (for Rear Disc Brake)

    Click here

  7. REMOVE REAR DISC (for Rear Disc Brake)

    Click here

  8. DISCONNECT SKID CONTROL SENSOR WIRE


    1. A005MCJ

      Using a screwdriver, disengage the claw of the connector lock portion and disconnect the skid control sensor wire connector.

      Note

      Do not remove the connector cover from the connector because the skid control sensor wire may be damaged.

  9. REMOVE REAR AXLE HUB AND BEARING ASSEMBLY (for Rear Drum Brake)


    1. A005J8R

      Remove the 4 bolts and remove the axle hub and bearing from the axle beam.

  10. REMOVE REAR AXLE HUB AND BEARING ASSEMBLY (for Rear Disc Brake)


    1. A005L06

      Remove the 4 bolts and remove the axle hub and bearing and the dust cover from the axle beam.