REAR AXLE HUB BOLT REPLACEMENT

CAUTION / NOTICE / HINT

PROCEDURE

1. REMOVE REAR WHEEL

2. REMOVE REAR BRAKE DRUM SUB-ASSEMBLY (for Rear Drum Brake)

   Click here

3. SEPARATE NO. 3 PARKING BRAKE CABLE ASSEMBLY (for Rear Disc Brake)

   Click here

4. SEPARATE REAR DISC BRAKE CYLINDER ASSEMBLY LH (for Rear Disc Brake)

   Click here

5. REMOVE REAR DISC BRAKE PAD KIT (for Rear Disc Brake)

   Click here

6. REMOVE REAR DISC BRAKE CYLINDER MOUNTING LH (for Rear Disc Brake)

   Click here

7. REMOVE REAR DISC (for Rear Disc Brake)

   Click here

8. REMOVE REAR AXLE HUB BOLT

   
   

   1. 

      Using SST, remove the axle hub bolt.

      SST

      09650-17011

9. INSTALL REAR AXLE HUB BOLT

   
   
   1. 

      Text in Illustration

      *1	Washer
      *2	Nut

      Install the washer and the nut onto a new axle hub bolt, as shown in the illustration.

      Recommended Service Nut
      Thread Diameter Thread Pitch 12.0 mm (0.472 in.) 1.5 mm (0.0591 in.)

      Tech Tips

      Recommended thickness of the washer is 20 mm (0.787 in.) or more.

   2. Using a screwdriver or the equivalent to hold the axle hub, install the axle hub bolt by tightening the nut.

10. INSTALL REAR DISC (for Rear Disc Brake)

    Click here

11. INSTALL REAR DISC BRAKE CYLINDER MOUNTING LH (for Rear Disc Brake)

    Click here

12. INSTALL REAR DISC BRAKE PAD KIT (for Rear Disc Brake)

    Click here

13. INSTALL REAR DISC BRAKE CYLINDER ASSEMBLY LH (for Rear Disc Brake)

    Click here

14. INSTALL NO. 3 PARKING BRAKE CABLE ASSEMBLY (for Rear Disc Brake)

    Click here

15. INSTALL REAR BRAKE DRUM SUB-ASSEMBLY (for Rear Drum Brake)

16. ADJUST REAR DRUM BRAKE SHOE CLEARANCE (for Rear Drum Brake)

    Click here

17. INSTALL REAR WHEEL

    Torque:

    103 N*m  { 1050 kgf*cm, 76 ft.*lbf }

18. INSPECT AND ADJUST PARKING BRAKE LEVER TRAVEL

    Click here