FRONT AXLE HUB BOLT REPLACEMENT

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE FRONT WHEEL

  2. SEPARATE FRONT DISC BRAKE CALIPER ASSEMBLY


    1. A005KY1

      Remove the 2 bolts and separate the disc brake caliper assembly.

      Note

      Hang the caliper using a piece of string or the equivalent.

  3. REMOVE FRONT DISC

    Click here

  4. REMOVE FRONT AXLE HUB BOLT


    1. A005JY0E01

      Using SST, remove the axle hub bolt.

      SST
      09650-17011

  5. INSTALL FRONT AXLE HUB BOLT


    1. A005L6ZE02
      Text in Illustration
      *1 Washer
      *2 Nut

      Install the washer and the nut onto a new axle hub bolt, as shown in the illustration.

      Recommended Service Nut
      Thread Diameter Thread Pitch
      12.0 mm (0.472 in.) 1.5 mm (0.0591 in.)

      Tech Tips

      Recommended thickness of the washer is 5 mm (0.197 in.) or more.

    2. Using a screwdriver or the equivalent to hold the axle hub, install the axle hub bolt by tightening the nut.

  6. INSTALL FRONT DISC

    Click here

  7. INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY


    1. A005KY1

      Install the disc brake caliper assembly with the 2 bolts.

      Torque:
      107 N*m  { 1089 kgf*cm, 79 ft.*lbf }

  8. INSTALL FRONT WHEEL

    Torque:
    103 N*m  { 1050 kgf*cm, 76 ft.*lbf }