FRONT DRIVE SHAFT ASSEMBLY(for 1NR-FE) INSTALLATION

PROCEDURE

1. INSTALL FRONT DRIVE SHAFT ASSEMBLY LH

   Click here

2. INSTALL FRONT DRIVE SHAFT ASSEMBLY RH

   Tech Tips

   Use the same procedure as for the LH side.

3. INSTALL FRONT AXLE ASSEMBLY LH

   Click here

4. INSTALL FRONT AXLE ASSEMBLY RH

   Tech Tips

   Use the same procedure for the RH side as for the LH side.

5. INSTALL FRONT LOWER SUSPENSION ARM SUB-ASSEMBLY LH

   Click here

6. INSTALL FRONT LOWER SUSPENSION ARM SUB-ASSEMBLY RH

   Tech Tips

   Use the same procedure for the RH side as for the LH side.

7. INSTALL TIE ROD END SUB-ASSEMBLY LH

   Click here

8. INSTALL TIE ROD END SUB-ASSEMBLY RH

   Tech Tips

   Use the same procedure for the RH side as for the LH side.

9. INSTALL FRONT STABILIZER LINK ASSEMBLY LH

   Click here

10. INSTALL FRONT STABILIZER LINK ASSEMBLY RH

    Tech Tips

    Use the same procedure for the RH side as for the LH side.

11. INSTALL FRONT SPEED SENSOR LH

    Click here

12. INSTALL FRONT SPEED SENSOR RH

    Tech Tips

    Use the same procedure for the RH side as for the LH side.

13. INSTALL FRONT AXLE SHAFT NUT LH

    Click here

14. INSTALL FRONT AXLE SHAFT NUT RH

    Tech Tips

    Use the same procedure for the RH side as for the LH side.

15. ADD MANUAL TRANSAXLE OIL (for Manual Transaxle)

    Click here

16. ADD CONTINUOUSLY VARIABLE TRANSAXLE FLUID (for CVT)

    Click here

17. INSPECT MANUAL TRANSAXLE OIL (for Manual Transaxle)

    Click here

18. INSPECT FOR OIL LEAK

    Tech Tips

    Use the same procedure for the RH side as for the LH side.

19. INSTALL ENGINE UNDER COVER RH

    Click here

20. INSTALL ENGINE UNDER COVER LH

    Click here

21. INSTALL FRONT WHEEL

    Torque:

    103 N*m  { 1050 kgf*cm, 76 ft.*lbf }

22. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT

    Click here