REAR SHOCK ABSORBER REMOVAL

PROCEDURE


  1. REMOVE REAR WHEEL

  2. REMOVE REAR ABSORBER CAP

    Click here

  3. REMOVE REAR SHOCK ABSORBER ASSEMBLY


    1. Support the axle beam with a jack. Insert a wooden block between the jack and the rear axle spring seat to prevent damage.

    2. A005KH0

      Hold the lower nut and loosen the upper nut.

    3. Remove the 2 nuts.

    4. Remove the cushion retainer and suspension support.

    5. A005KB5

      Remove the bolt while keeping the nut from rotating and remove the shock absorber.

      Note

      Remove the nut from the bolt side because the one on the lower side is a jam nut.

  4. REMOVE REAR SUSPENSION SUPPORT STOPPER

  5. REMOVE REAR SUSPENSION SUPPORT ASSEMBLY