OIL PAN REMOVAL

PROCEDURE


  1. REMOVE ENGINE UNDER COVER LH

    Click here

  2. DRAIN CVT FLUID


    1. A005HWQ

      Using a socket hexagon wrench (6 mm), remove the drain plug and gasket and drain the fluid.

    2. A005GVIE02
      Text in Illustration
      *1 No. 1 Transmission Oil Filler Tube

      Using a socket hexagon wrench (6 mm), remove the No. 1 transmission oil filler tube and drain the fluid.

    3. Using a socket hexagon wrench (6 mm), install the No. 1 transmission oil filler tube.

      Torque:
      0.8 N*m  { 8.2 kgf*cm, 7 in.*lbf }

    4. Install a gasket and temporarily tighten the drain plug with a socket hexagon wrench (6 mm).

      Tech Tips

      Because the drain plug will be removed again, the gasket can be reused at this time.

  3. REMOVE TRANSAXLE OIL PAN SUB-ASSEMBLY


    1. A005M5O

      Remove the 15 bolts and the transaxle oil pan sub-assembly.

    2. A005IJDE01
      Text in Illustration
      *1 Oil Cleaner Magnet

      Remove the transaxle oil pan gasket and 2 oil cleaner magnets from the transaxle oil pan sub-assembly.

      Note


      • Remove any metal particles and clean sludge from the inside of the transaxle oil pan sub-assembly.

      • Remove all metal particles from the oil cleaner magnets.

  4. REMOVE NO. 1 TRANSMISSION OIL FILLER TUBE


    1. Using a socket hexagon wrench (6 mm), remove the drain plug and gasket and drain the fluid.

    2. Using a socket hexagon wrench (6 mm), remove the No. 1 transmission oil filler tube and drain the fluid.