PARK / NEUTRAL POSITION SWITCH REMOVAL

PROCEDURE


  1. REMOVE BATTERY

    Click here

  2. REMOVE BATTERY TRAY

    Click here

  3. REMOVE BATTERY CARRIER

    Click here

  4. SEPARATE TRANSMISSION CONTROL CABLE ASSEMBLY


    1. Move the shift lever to N.

    2. A005LO1

      Remove the nut and disconnect the transmission control cable assembly from the transmission control shaft lever.

    3. Remove the clip and separate the transmission control cable assembly from the No. 1 transmission control cable bracket.

  5. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. Disconnect the park/neutral position switch connector.

    2. A005LRM

      Remove the nut, the spring washer and the transmission control shaft lever.

    3. A005IDU

      Bend down the tabs of the nut stopper with a screwdriver and remove the lock nut and the nut stopper.

    4. A005L17

      Remove the 2 bolts and the park/neutral position switch assembly.