FRONT DIFFERENTIAL OIL SEAL REPLACEMENT

PROCEDURE


  1. DRAIN CONTINUOUSLY VARIABLE TRANSAXLE FLUID


    1. A005M4I

      Using a 6 mm hexagon socket wrench, remove the overflow plug and gasket from the transaxle oil pan sub-assembly.

    2. A005M8AE02
      Text in Illustration
      *1 No. 1 Transmission Oil Filler Tube

      Using a 6 mm hexagon socket wrench, remove the No. 1 transmission oil filler tube from the transaxle oil pan sub-assembly.

      Tech Tips

      Removing the No. 1 transmission oil filler tube will drain all oil in the transaxle oil pan sub-assembly.

    3. Using a 6 mm hexagon socket wrench, install the No. 1 transmission oil filler tube to the transaxle oil pan sub-assembly.

      Torque:
      1.7 N*m  { 17 kgf*cm, 15 in.*lbf }

    4. Using a 6 mm hexagon socket wrench, install the overflow plug with a new gasket to the transaxle oil pan sub-assembly.

      Torque:
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

  2. REMOVE FRONT DRIVE SHAFT ASSEMBLY

    Click here

  3. REMOVE CVT TYPE T OIL SEAL LH


    1. A005IRPE04

      Using SST, remove the CVT type T oil seal LH from the transaxle case.

      SST
      09308-00010

      Note

      Do not damage the transaxle case.

  4. REMOVE CVT TYPE T OIL SEAL RH


    1. A005IRGE01

      Using SST, remove the CVT type T oil seal RH from the transaxle housing.

      SST
      09308-00010

      Note

      Do not damage the transaxle housing.

  5. INSTALL CVT TYPE T OIL SEAL LH


    1. A005JBEE01

      Using SST and a hammer, install a new CVT type T oil seal LH to the transaxle case.

      SST
      09387-00010
      09950-70010   ( 09951-07150 )
      Standard depth
      6.7 to 7.7 mm (0.264 to 0.303 in.)

      Note

      Do not damage the oil seal lip.

    2. Coat the lip of the CVT type T oil seal LH with MP grease.

  6. INSTALL CVT TYPE T OIL SEAL RH


    1. A005GEIE02

      Using SST and a hammer, install a new CVT type T oil seal RH to the transaxle housing.

      SST
      09554-14010
      09950-70010   ( 09951-07100 )
      Standard depth
      1.5 to 2.5 mm (0.0591 to 0.0984 in.)

      Note

      Do not damage the oil seal lip.

    2. Coat the lip of the CVT type T oil seal RH with MP grease.

  7. INSTALL FRONT DRIVE SHAFT ASSEMBLY

    Click here