OIL PRESSURE SENSOR INSTALLATION

PROCEDURE

1. INSTALL OIL PRESSURE SENSOR

   
   

   1. Coat the O-ring of the oil pressure sensor with Toyota Genuine CVT fluid TC.

   2. Using a deep socket wrench 27 mm, install the oil pressure sensor.

      Torque:

      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

   3. Connect the oil pressure sensor connector.

2. INSTALL ENGINE UNDER COVER LH

   Click here

3. INSTALL FRONT WHEEL LH

   Torque:

   103 N*m  { 1050 kgf*cm, 76 ft.*lbf }

4. RESET MEMORY

   Click here