PARK / NEUTRAL POSITION SWITCH INSTALLATION

PROCEDURE


  1. INSTALL PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. A005LG9

      Using SST, install the park/neutral position switch assembly with a new gasket to the manual transaxle assembly.

      SST
      09817-16011
      Torque:
      40 N*m  { 410 kgf*cm, 30 ft.*lbf }

    2. Connect the park/neutral position switch assembly connector and wire harness clamp.

  2. INSTALL TIE ROD END SUB-ASSEMBLY LH

    Click here

  3. INSTALL FRONT WHEEL LH

    Torque:
    103 N*m  { 1050 kgf*cm, 76 ft.*lbf }