SHIFT LEVER ASSEMBLY INSTALLATION

PROCEDURE

1. INSTALL SHIFT LOCK CONTROL UNIT ASSEMBLY

   
   

   1. Install the shift lock control unit assembly with the 4 nuts.

      Torque:

      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

   2. Connect the 3 connectors and the 2 wire harness clamps.

2. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

   

   
   

   1. Install the shift lever knob sub-assembly and twist it in the direction indicated by the arrow.

3. INSTALL LOWER INSTRUMENT PANEL CENTER FINISH PANEL

   Click here

4. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

   Click here

5. INSTALL NO. 1 METER HOOD CLUSTER

   Click here

6. INSTALL NO. 2 METER HOOD CLUSTER

   Click here

7. INSTALL REAR CONSOLE BOX ASSEMBLY

   Click here