SHIFT LEVER ASSEMBLY DISASSEMBLY

PROCEDURE


  1. REMOVE FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY

    A005LL6

    1. Disengage the 4 clips and remove the floor shift position indicator housing sub-assembly.

  2. REMOVE INDICATOR LAMP WIRE SUB-ASSEMBLY


    1. A005LZ1

      Remove the indicator light wire sub-assembly, and detach the wire harness clamp.

    2. A005M2S

      Remove the bulb and cap from the indicator light wire sub-assembly.

    3. A005GOGE04
      Text in Illustration
      *1 Protective Tape
      *a Secondary Lock

      Using a screwdriver with its tip wrapped in protective tape, release the secondary lock.

    4. A005M6TE02
      Text in Illustration
      *a Mark

      Put marks on wire harnesses 2 and 4.

    5. Release the locking lugs of terminals 2, 4, 6 and 8, and pull the wire harnesses out of the terminals.

  3. REMOVE POSITION INDICATOR LIGHT HOUSING

    A005KJG

    1. Disengage the 4 claws and remove the position indicator light housing from the floor shift position indicator housing sub-assembly.

  4. REMOVE POSITION INDICATOR LIGHT GUIDE


    1. A005JCM

      Disengage the 4 claws and remove the position indicator light guide from the position indicator light housing.

  5. REMOVE LOWER SHIFT LEVER ASSEMBLY

    A005IZQ

    1. Disengage the 4 claws and remove the lower shift lever assembly from the shift lock control unit assembly.

  6. REMOVE POSITION INDICATOR SLIDE COVER

    A005KY2

    1. Remove the position indicator slide cover from the shift lock control unit assembly.

  7. REMOVE NO. 2 POSITION INDICATOR SLIDE COVER

    A005JH5

    1. Remove the No. 2 position indicator slide cover from the position indicator slide cover.

  8. REMOVE SHIFT LOCK RELEASE BUTTON


    1. A005IUG

      Remove the shift lock release button and compression spring from the shift lock control unit assembly.

  9. REMOVE SHIFT LEVER POSITION SENSOR

    A005KGL

    1. Remove the 3 screws and shift lever position sensor.