MULTI-MODE MANUAL TRANSAXLE SYSTEM DTC CHECK / CLEAR

CHECK DTC (Using intelligent tester)

1. Connect the intelligent tester to the DLC3.

2. Turn the ignition switch to ON.

3. Turn the tester on.

4. Enter the following menus: Powertrain / Multi-Mode M/T.

5. Check DTCs and freeze frame data, and write them down.

6. See DTC chart to confirm the details of the DTCs Click here.

   Tech Tips

   Intelligent testers can display current DTC data, pending DTC data and historical DTC data. Touch the [Current], [Pending] or [History] button in the DTC display screen.

   [Current]: Displays the current DTC data

   [Pending]: Displays the pending DTC data

   [History]: Displays the historical DTC data (past codes)

FREEZE FRAME DATA

1. Connect the intelligent tester to the DLC3.

2. Turn the ignition switch to ON.

3. Turn the tester on.

4. Read DTCs by selecting the following menus: Powertrain / Multi-Mode M/T / DTC.

5. Select the parameter(s) to check the freeze frame data.

6. Note down the DTC(s) and freeze frame data.

   Tech Tips

   
   

   • A "!" displayed in red to the left of DTC data indicates that freeze frame data has been recorded for that data.

   • For help using the intelligent tester, refer to the instruction manual.

CLEAR DTCs AND FREEZE FRAME DATA (Using intelligent tester)

1. Connect the intelligent tester to the DLC3.

2. Turn the ignition switch to ON.

3. Turn the tester on.

4. Enter the following menus: Powertrain / Multi-Mode M/T / DTC / Clear.

5. Erase DTCs and freeze frame data by pressing the YES button on the tester.

   Tech Tips

   For help using the intelligent tester, refer to the instruction manual.