MULTI-MODE MANUAL TRANSAXLE SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING

DTC Code DTC Name
HOW TO PROCEED WITH TROUBLESHOOTING

CAUTION / NOTICE / HINT

Tech Tips


  • The TCM of this system is connected to the CAN communication system. Therefore, before starting troubleshooting, be sure to check that there is no trouble in the CAN communication system.

  • *: Use the intelligent tester.

PROCEDURE


  1. VEHICLE BROUGHT TO WORKSHOP

    Result
    Result
    NEXT

    NEXT

  2. CUSTOMER PROBLEM ANALYSIS

    Result
    Result
    NEXT

    NEXT

  3. CONNECT INTELLIGENT TESTER TO DLC3*

    Tech Tips

    If the display indicates a communication fault in the tool, inspect the DLC3.

    Result
    Result
    NEXT

    NEXT

  4. CHECK CAN COMMUNICATION SYSTEM*


    1. Refer to DTC output for the CAN communication system.

      Click here

      Result
      Result Proceed to
      No CAN system DTC output A
      CAN system DTC output B

      Tech Tips

      The TCM of this system is connected to the CAN communication system. Therefore, before starting troubleshooting, check that there is no trouble in the CAN communication system

      Click here


    B

    PROCEED TO CAN COMMUNICATION SYSTEM

    A

  5. CHECK DTC AND FREEZE FRAME DATA*

    Note

    Record or print DTCs and freeze frame data, if necessary.

    Tech Tips

    Refer to the DTC Check/Clear.

    Click here

    Result
    Result
    NEXT

    NEXT

  6. CLEAR DTC AND FREEZE FRAME DATA*

    Tech Tips

    Refer to the DTC Check/Clear.

    Click here

    Result
    Result
    NEXT

    NEXT

  7. VISUAL INSPECTION

    Result
    Result
    NEXT

    NEXT

  8. PROBLEM SYMPTOM CONFIRMATION

    Result
    Result Proceed to
    Symptom does not occur A
    Symptom occurs B

    B

    GO TO STEP 10 Click here

    A

  9. SYMPTOM SIMULATION

    Tech Tips

    Refer to the relevant pages.

    Click here

    Result
    Result
    NEXT

    NEXT

  10. DTC CHECK*

    Tech Tips

    Refer to the DTC Check/Clear.

    Click here

    Result
    Result Proceed to
    DTC output A
    No DTC output B

    B

    PROBLEM SYMPTOMS TABLE Click here

    A

  11. DTC CHART

    Tech Tips

    Refer to the Diagnostic Trouble Code Chart.

    Click here

    Result
    Result
    NEXT

    NEXT

  12. CIRCUIT INSPECTION

    Result
    Result
    NEXT

    NEXT

  13. IDENTIFICATION OF PROBLEM

    Result
    Result
    NEXT

    NEXT

  14. ADJUSTMENT, REPAIR OR REPLACE

    Result
    Result
    NEXT

    NEXT

  15. CONFIRMATION TEST

    Result
    Result
    NEXT

    NEXT

    END

  16. PROBLEM SYMPTOMS TABLE

    Tech Tips

    Refer to the Problem Symptoms Table.

    Click here

    Result
    Result
    NEXT

    NEXT

  17. PART INSPECTION

    Result
    Result
    NEXT

    NEXT

    GO TO STEP 14 Click here