SHIFT AND SELECT ACTUATOR REASSEMBLY

PROCEDURE


  1. INSTALL SHIFT STROKE SENSOR


    1. Apply MP grease to a new O-ring.

    2. Install the new O-ring onto the shift stroke sensor.

    3. A005MB7E02
      Text in Illustration
      *a Sensor Arm (Actuator Side)
      *b Sensor Arm (Sensor Side)

      Set the stroke senor so that the sensor side and the actuator side sensor arms are in the positions shown in the illustration.

    4. A005I4G

      Turn the stroke sensor clockwise and fix it with the 2 screws.

      Torque:
      1.3 N*m  { 13 kgf*cm, 12 in.*lbf }

  2. INSTALL SELECT STROKE SENSOR


    1. Apply MP grease to a new O-ring.

    2. Install the new O-ring onto the select stroke sensor.

    3. A005MB7E02
      Text in Illustration
      *a Sensor Arm (Actuator Side)
      *b Sensor Arm (Sensor Side)

      Set the stroke sensor so that the sensor side and the actuator side sensor arms are in the positions shown in the illustration.

    4. A005K8T

      Turn the stroke sensor clockwise and fix it with the 2 screws.

      Torque:
      1.3 N*m  { 13 kgf*cm, 12 in.*lbf }