SHIFT STROKE SENSOR INSTALLATION

PROCEDURE


  1. INSTALL SHIFT STROKE SENSOR


    1. Apply MP grease to a new O-ring.

    2. Install the new O-ring onto the shift stroke sensor.

    3. A005MB7E05
      Text in Illustration
      *a Sensor Arm (Actuator Side)
      *b Sensor Arm (Sensor Side)

      Set the shift stroke senor so that the sensor side and the actuator side sensor arms are in the positions shown in the illustration.

    4. Turn the shift stroke sensor clockwise and fix it with the 2 screws.

      Torque:
      1.3 N*m  { 13 kgf*cm, 12 in.*lbf }

    5. Install the wire harness clamp bracket with the bolt.

      Torque:
      13 N*m  { 130 kgf*cm, 9 ft.*lbf }

    6. Connect the connectors.

  2. INSTALL BATTERY CARRIER

    Click here

  3. INSTALL BATTERY TRAY

    Click here

  4. INSTALL BATTERY

    Click here

  5. INSTALL AIR CLEANER BRACKET

    Click here

  6. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  7. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

    Click here

  8. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

    Click here

  9. PERFORM INITIALIZATION OF MULTI-MODE MANUAL TRANSMISSION ECU

    Click here

  10. PERFORM LEARNING OF MULTI-MODE MANUAL TRANSMISSION SYSTEM

    Click here

  11. PERFORM SYNCHRONIZATION POSITION CALIBRATION

    Click here