BACK-UP LIGHT SWITCH INSTALLATION

PROCEDURE


  1. INSTALL BACK-UP LIGHT SWITCH ASSEMBLY

    A005L6FE05
    Text in Illustration
    *1 Deep socket wrench 27 mm

    1. Using a deep socket wrench 27 mm, install the back-up light switch assembly with a new gasket onto the manual transaxle.

      Torque:
      40 N*m  { 410 kgf*cm, 30 ft.*lbf }

    2. Connect the back-up light switch connector.

  2. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  3. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

    Click here

  4. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

    Click here