TRANSMISSION CONTROL CABLE INSTALLATION

PROCEDURE

1. INSTALL TRANSMISSION CONTROL CABLE ASSEMBLY

   
   

   1. Install the transmission control cable assembly with the 3 nuts.

      Torque:

      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

   2. 

      Install the 2 transmission control cables with 2 new clips*1.

   3. Install the 2 clips.

2. CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY

   Click here

3. ADJUST TRANSMISSION CONTROL CABLE ASSEMBLY

   Click here

4. INSTALL LOWER INSTRUMENT PANEL CENTER FINISH PANEL

   Click here

5. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

   Click here

6. INSTALL NO. 1 METER HOOD CLUSTER

   Click here

7. INSTALL NO. 2 METER HOOD CLUSTER

   Click here

8. INSTALL REAR CONSOLE BOX ASSEMBLY

   Click here

9. INSTALL BATTERY CARRIER

   Click here

10. INSTALL BATTERY TRAY

    Click here

11. INSTALL BATTERY

    Click here

12. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

    Click here

13. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

    Click here

14. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

    Click here

15. INSTALL FRONT EXHAUST PIPE ASSEMBLY

    Click here

16. INSTALL FRONT FLOOR CENTER BRACE

    Click here

17. INSPECT FOR EXHAUST GAS LEAK