SHIFT AND SELECT LEVER SHAFT REASSEMBLY

PROCEDURE


  1. INSTALL SELECT STOPPER BLOCK


    1. Coat the select stopper block with manual transaxle oil.

    2. A005J02E03

      Make sure that the select stopper block is installed as shown in the illustration.

      Note

      Make sure of the installation direction.

    3. A005HXIE03
      Text in Illustration
      *a Depth

      Using a pin punch 5 mm and a hammer, install the slotted spring pin onto the shift and select lever shaft.

      Driven in depth
      -0.2 to 0.8 mm (-0.00787 to 0.0315 in.)

  2. INSTALL RELEASE HEAD STRAIGHT PIN


    1. A005KA0

      Install the release head straight pin to the select stopper block.

    2. Coat the release head with manual transaxle oil.

    3. A005MF8E01

      Make sure that the release head is installed as shown in the illustration.

      Note

      Make sure of the installation direction.

    4. A005M3PE03
      Text in Illustration
      *a Hook
      *b Hook Side
      *c 14.5 to 15.5 mm (0.571 to 0.610 in.)
      *d 8.3 to 9.3 mm (0.327 to 0.366 in.)

      Make sure that the release head torsion spring is installed as shown in the illustration.

      Note

      Make sure of the installation direction.

    5. Coat the front inner shift lever with manual transaxle oil.

    6. A005JD9

      Make sure that the front inner shift lever is installed as shown in the illustration.

      Note

      Make sure of the installation direction.

      Tech Tips

      Insert the torsion spring to the installation hole of the front inner shift lever.

    7. A005HQXE05
      Text in Illustration
      *1 Release Head Torsion Spring
      *2 Release Head Straight pin

      Turn the front inner shift lever counterclockwise to align it with the installation surface of the release head straight pin, and install it.

      Note

      Make sure that the front shift lever is installed as shown in the illustration.

    8. A005GXLE05
      Text in Illustration
      *a Depth

      Using a pin punch 5 mm and a hammer, install the slotted spring pin onto the shift and select lever shaft.

      Driven in depth
      -0.2 to 0.8 mm (-0.00787 to 0.0315 in.)

  3. INSTALL INNER NO. 2 SHIFT LEVER


    1. Coat the inner No. 2 shift lever with manual transaxle oil.

    2. A005I0ME03
      Text in Illustration
      *a Depth

      Using a pin punch 5 mm and a hammer, install the inner No. 2 shift lever and slotted spring pin onto the shift and select lever shaft.

      Driven in depth
      0 to 0.6 mm (0 to 0.0236 in.)

      Note

      Make sure of the installation direction.