CLUTCH STROKE SENSOR(for EC65A) INSTALLATION

PROCEDURE


  1. INSTALL CLUTCH STROKE SENSOR


    1. Apply MP grease to a new O-ring.

    2. Install the new O-ring onto the clutch stroke sensor.

    3. A005K4VE01
      Text in Illustration
      *a Sensor Arm (Actuator Side)
      *b Sensor Arm (Sensor Side)

      Set the clutch stroke sensor so that the sensor side and the actuator side sensor arms are in the positions shown in the illustration.

    4. Turn the clutch stroke sensor clockwise and fix it with the 2 screws.

      Torque:
      2.0 N*m  { 20 kgf*cm, 17 in.*lbf }

    5. Connect the connector.

  2. INSTALL AIR CLEANER BRACKET

    Click here

  3. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  4. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

    Click here

  5. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

    Click here

  6. PERFORM INITIALIZATION OF MULTI-MODE MANUAL TRANSMISSION ECU

    Click here

  7. PERFORM LEARNING OF MULTI-MODE MANUAL TRANSMISSION SYSTEM

    Click here

  8. PERFORM SYNCHRONIZATION POSITION CALIBRATION

    Click here