CLUTCH SYSTEM(for EC65A) PROBLEM SYMPTOMS TABLE
Tech Tips
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
| Symptom | Suspected Area | See page |
|---|---|---|
| Clutch grabs/chatters | Engine mounting (Loose) | - |
| Clutch disc assembly (Excessive runout) | ||
| Clutch disc assembly (Oily) | ||
| Clutch disc assembly (Worn out) | ||
| Clutch disc torsion spring (Damaged) | ||
| Clutch disc assembly (Glazed) | ||
| Diaphragm spring (Tip out alignment) | ||
| Clutch noisy | Clutch release with bearing cylinder assembly (Worn, dirty, or damaged) | |
| Clutch disc torsion spring (Damaged) | ||
| Clutch slips | Multi-mode manual transaxle system (Faulty) | - |
| Clutch disc assembly (Oily) | ||
| Clutch disc assembly (Worn out) | ||
| Diaphragm spring (Damaged) | ||
| Pressure plate (Distorted) | - | |
| Flywheel sub-assembly (Distorted) | ||
| Clutch does not disengage | Clutch actuator (Damaged) | |
| Clutch line (Air in line) | ||
| Clutch release with bearing cylinder assembly (Damaged) | ||
| Clutch disc assembly (Out of line) | ||
| Clutch disc assembly (Runout excessive) | ||
| Clutch disc assembly (Lining broken) | ||
| Clutch disc assembly (Dirty or burned) | ||
| Clutch disc assembly (Oily) | ||
| Clutch disc assembly (Lack of spline grease) |