VACUUM SENSOR ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL CHECK VALVE GROMMET


    1. Install a new check valve grommet to the brake booster assembly.

  2. INSTALL VACUUM SENSOR ASSEMBLY


    1. A005GOBE04
      Text in Illustration
      *a Upper Side of Vehicle
      *b 40° +/- 20°

      Install the vacuum sensor assembly to the brake booster assembly shown in the illustration.

    2. Connect the connector.

  3. INSTALL CENTER NO. 1 COWL TOP VENTILATOR LOUVER

    A005JCS

    1. Engage the clip to install the center No. 1 cowl top ventilator louver.

    2. Slide the hood to cowl top seal as shown in the illustration.