VACUUM SENSOR ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE CENTER NO. 1 COWL TOP VENTILATOR LOUVER

    A005M2L

    1. Slide the hood to cowl top seal as shown in the illustration.

    2. Disengage the clip to remove the center No. 1 cowl top ventilator louver.

  2. REMOVE VACUUM SENSOR ASSEMBLY


    1. Disconnect the connector.

    2. A005LP2

      Remove the vacuum sensor assembly from the brake booster assembly.

  3. REMOVE CHECK VALVE GROMMET


    1. Remove the check valve grommet from the brake booster assembly.