CRUISE CONTROL MAIN SWITCH INSPECTION

PROCEDURE


  1. INSPECT CRUISE CONTROL MAIN SWITCH

    A005KLTE01
    Text in Illustration
    *a

    Component without harness connected

    (Cruise Control Main Switch)

    		 *b Cruise Control Main Switch
    *c Lever *d ON/OFF
    *e -SET *f +RES
    *g CANCEL - -

    1. Measure the resistance and check the results in accordance with the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 (ECC) - 3 (CCS) Main Switch off 1 MΩ or higher
      Main Switch on Below 2.5 Ω
      +RES 235 to 245 Ω
      -SET 617 to 643 Ω
      CANCEL 1509 to 1571 Ω

      If the result is not as specified, replace the cruise control main switch.