CRUISE CONTROL MAIN SWITCH INSTALLATION

PROCEDURE


  1. INSTALL CRUISE CONTROL SWITCH WIRE


    1. Install the cruise control switch wire to the spiral cable sub-assembly.

    2. Connect the connector.

  2. INSTALL CRUISE CONTROL MAIN SWITCH


    1. A005J64

      Insert the cruise control main switch from inside the steering wheel as shown in the illustration.

    2. Install the cruise control main switch with the 2 screws.

      Torque:
      2.4 N*m  { 24 kgf*cm, 21 in.*lbf }

    3. Connect the connector.

  3. INSTALL STEERING PAD

    Click here

  4. INSTALL LOWER NO. 2 STEERING WHEEL COVER

    Click here

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Torque:
    5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

  6. INSTALL STEERING PAD

    Click here

  7. INSPECT SRS WARNING LIGHT

    Click here