CRUISE CONTROL MAIN SWITCH REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing Click here.

PROCEDURE


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

  2. REMOVE LOWER NO. 2 STEERING WHEEL COVER

    Click here

  3. REMOVE STEERING PAD

    Click here

  4. REMOVE CRUISE CONTROL MAIN SWITCH


    1. A005L57

      Disconnect the connector.

    2. Remove the 2 screws.

    3. A005KTB

      Remove the cruise control main switch as shown in the illustration.

  5. REMOVE CRUISE CONTROL SWITCH WIRE


    1. A005J7N

      Disconnect the connector.

    2. Remove the cruise control switch wire from the spiral cable sub-assembly.